BOILER POWER FLUSH
Competitive Prices from £285!
A Power flush is the most effective way of fully cleaning a central heating system. It provides enormous benefit to the efficiency of a system that’s full of sludge.
DOES YOUR HEATING SYSTEM HAVE ANY OF THE FOLLOWING?
Cold spots on radiators?
Is your central heating system slow to warm up?
Do your radiators need bleeding regularly?
Is the water in the system dirty?
Do you have repeated pump failures?
Do you have a noisy boiler?
Any of these symptoms could indicate that your system is suffering from circulation problems from internal corrosion causing sludge. This in turn means that your heating system has to work much longer and harder than when it was new to achieve a comfortable room temperature, wasting energy and money on your fuel bills.
If you have a new boiler installed, many manufactures insist your system is power flushed before the boiler is fitted or they will cancel the warranty. This is because they know the dirty water will reduce the efficiency, and can cause premature failures.
WHAT WILL A POWERFLUSH DO?
A very powerful pump will be connected to your central heating system. This will pump water round at high velocity to loosen the sludge and debris that is making your central heating inefficient. Attached to the pump is a hugely powerful magnet, this grabs the sludge (metal deposits) as they pass by.
Chemicals are added to aide in this process, this is then pumped through all the radiators individually to give the best possible results.
All of the sludge water is then replaced with fresh clean water, and an inhibitor is added to the system to prevent any further corrosion from sludge forming. A powerflush can usually be done in 6-8 hours.
AFTER THE POWERFLUSH
A fully cleaned, efficient system
Working hot radiators
Lower fuel bills
Peace of mind
WATER TESTING AS STANDARD ON ALL BOILER INSTALLATIONS
We are so confident in our power flushing and the quality of our installation we send a sample of the system water for independent testing. You will then receive a certificate proving your system water is clean and inhibited.
Water is tested for Corrosion products, scale deposition, PH level, chloride, inhibitor level, iron ppm, copper ppm, aluminium ppm.
OUR LATEST CUSTOMER COMMENTS
“Very professional company from start to finish, very tidy and respectful of property and the standard of workmanship was very high. I would highly recommend this comapany.”
@ Verified By Email – June 2018
“Outstanding and very professional.” January 2018
This was a very big system comprising 27 radiators and 3 heated towel rails over 3 floors and spread over 4 thermostatically controlled heating zones. It represented the equivalent of 4 normal houses. The Engineer was not phased by this daunting task which was carried out in a highly professional manner without fuss and minimal disturbance during the 2 days it took to complete. We picked PDL at random from the internet and we regard ourselves as very lucky to have discovered such an exceptional craftsman.
The procedure of how the system worked and the anticipated results were fully explained prior to the work being carried out in a straight forward, understandable way. I was saved the cost of a boiler replacement (as had been recommended by another company) by having the heating system power flushed. I am delighted with the results.
An excellent first class service from a conscientious craftsman, I have every confidence in his workmanship. We noticed a significant improvement in the performance of our heating system. Highly Recommended.
Very efficient, got on with the work very quickly. The system we have has been in for many years and left the engineer with many problems to resolve. We had a problem radiator in the kitchen that was barely getting warm, now its the hottest radiator in the house! We rate the service as excellent.