Good quality boilers are reliable and efficient, if they are installed correctly. Most people know of somebody who has had “nothing but problems” after having a new boiler fitted. This is usually because of poor fitting practices, not necessarily a faulty boiler. Modern day boilers achieve higher efficiency by forcing water through very small passage ways in large low capacity heat exchangers. This means the gas has to heat a smaller body of water to achieve the same result as an older boiler would. It is critical that a new boiler is not installed onto old pipe work and radiators without the system being fully cleaned. Many old boilers would still work with sludge dirty water, but in order to achieve maximum efficiency and its full life span, new boilers require clean water.

We know that a new boiler or full central heating system is a large investment. It is a false economy to fit a substandard boiler or to take short cuts with inadequate gas supply or by fitting to a dirty system. Fitting this way will at best lessen the efficiency of your boiler and at worst will cause repeated brake downs. We will ensure your new boiler is installed by using the most up to date modern practice. If necessary we will carry out a full Powerflush to your system; and fit a filter to protect the boiler and carry out independent water testing to ensure years of trouble free heating.

There are three main types of central heating systems: combi, system or open vented and there are many different manufacturers of these. However We only fit Worcester Bosch and Vaillant boilers as we believe they offer the best performance and reliability, which in turn makes them great value for money. Our aim is to provide the right boiler for your budget without compromising on quality. We offer a free of charge survey in which we will calculate the KW rating required, and best type of system for your home