Please wait
Powerflush and water testing

Power Flush

Boiler installations

Competitive Prices from £285!

A Power flush is the most effective way of fully cleaning a central heating system. It provides enormous benefit to the efficiency of a system that's full of sludge.

Does your heating system have any of the following?

Cold spots on radiators?
Is your central heating system slow to warm up?
Do your radiators need bleeding regularly?
Is the water in the system dirty?
Do you have repeated pump failures?
Do you have a noisy boiler?

Any of these symptoms could indicate that your system is suffering from circulation problems from internal corrosion causing sludge. This in turn means that your heating system has to work much longer and harder than when it was new to achieve a comfortable room temperature, wasting energy and money on your fuel bills.

If you have a new boiler installed, many manufactures insist your system is power flushed before the boiler is fitted or they will cancel the warranty. This is because they know the dirty water will reduce the efficiency, and can cause premature failures.

What will a powerflush do?

A very powerful pump will be connected to your central heating system. This will pump water round at high velocity to loosen the sludge and debris that is making your central heating inefficient. Attached to the pump is a hugely powerful magnet, this grabs the sludge (metal deposits) as they pass by.

Chemicals are added to aide in this process, this is then pumped through all the radiators individually to give the best possible results.

All of the sludge water is then replaced with fresh clean water, and an inhibitor is added to the system to prevent any further corrosion from sludge forming. A powerflush can usually be done in 6-8 hours.

After the Powerflush you will get

A fully cleaned, efficient system
Working hot radiators
Lower fuel bills
Peace of mind

Click on image to see more detail

Power Flush

Water testing as standard on all boiler installations

We are so confident in our power flushing and the quality of our installation we send a sample of the system water for independent testing. You will then receive a certificate proving your system water is clean and inhibited.

Water is tested for Corrosion products, scale deposition, PH level, chloride, inhibitor level, iron ppm, copper ppm, aluminium ppm.

ADEY water testing
Boiler water testing
ADEY water testing kit

Here is what some of our satisfied customers had to say

after a powerflush

Don't hesitate to contact Us

Need a quote or have a query?
Show / Hide
Which Trusted Trader

Get A Quote